Wavlink AC750 Device Unboxing And Setup

Kommentarer · 3 Visninger

tony reacherr 06 May 2025

For starting the process of the Wavlink AC750 setup, the Wavlink extender and the router must be unpacked.

For starting the process of the Wavlink AC750 setup, the Wavlink extender and the router must be unpacked. Make sure all required accessories such as an ethernet wire and power adapter are there. Connect using the adapter, which powers the device. The ethernet cable has to be inserted into the router and then to the extender. Check if it is inserted in the WAN port. In the case of additional devices, the ethernet cable would have to be connected to the LAN port. And now press the button on the power switch that is attached to the power outlet. That is for the device to finish booting down the very few seconds it needs. At last, open a browser and enter the IP address of the connected device. It has two IPs, either 192.168.1.1 or 192.168.10.1; thus, hit the enter button. And here goes the setup page of the device!

#wavlink ac750 setup